MOTOREX CS-Cleaner Neutral system cleaner for cooling systems 5L

CS-CLEANER is a neutral system cleaner for coolant circuits and the spindle cooling systems of machine tools. Thanks to innovative additives without any biocides, CS-CLEANER does not fall into the biocide product category and can be used worldwide without any restrictions.

CS-CLEANER is excellently suited to removing residual dirt and other contaminants such as fungus residues in coolant circuits.

Characteristics

• Great cleaning effect
• Dissolves grease, oil and typical residual sludge
• Compatible with plastics, paints and metals
• Free of VOCs
• Pleasant citrus odor

Application

• 48 hours before replacing the coolant, add 3% (based on system volume) of CS-CLEANER.
• For heavily contaminated cooling systems, we recommend leaving the CS-CLEANER in the system for as much as 72 hours or adding a biocide.
• After adding the system cleaner, machining may continue as usual without interruption.

To consider before refilling

• Typical residual sludge like solid fungus remains must be removed mechanically.
• Drain system completely and clean thoroughly.

Note: Applicable for water-miscible coolants only, such as Motorex Cool X or Core Ready Plus

Technical specifications

• Color (DIN ISO 2049): light yellow
• Density at 20 °C (ASTM D 4052): 1.066 g/ml 
• pH value: 7.9
• Flash point: 65 °C
• Water hazard class: WGK 1
• Disposal code: VeVA/EWC 07 06 01
• Content: 5L
• Also available as: 1 L bottle, 25L canisters
• Manufacturer number: 304589 / 304590

Hazard Information (CLP)

Signal word: Danger.

Hazard statements (H-phrases)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H317: May cause an allergic skin reaction.

Precautionary statements (P-phrases)

Prevention:

• P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
• P264: Wash thoroughly after handling.
• P280: Wear protective gloves / eye protection / face protection.

Response:

• P302+P352: IF ON SKIN: Wash with plenty of water.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.
• P321: Specific treatment (see label).
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional Information

• Contains biocidal products: Propan-2-ol, 1,2-Benzisothiazol-3(2H)-one.

MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com