MOTOREX COOL-X AW Coolant for spindle systems ready to use 20l

MOTOREX COOL-X AW is a ready-to-use coolant with corrosion protection for high-performance spindles.
The ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).

Characteristics

• Ready to use
• Very efficient
• Heat dissipation
• Prevents electrochemical corrosion
• Effectively protects aluminum, nonferrous and ferrous metals against corrosion
• Galvanized parts are not attacked
• Low maintenance
• Compatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmed
• Volume: 20L canister
• Also available as: 60L, 198L barrel

Application

• COOL-X AW is ready to use, 26% concentration. do not add any water.
• An average operating temperature of 20 – 25 ° C is very effective in protecting elastomers in the long term.
• If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X AW closed in the original container at 5 – 35 ° C.
• In general, MOTOREX COOL-X AW should not be exposed to temperatures below 0 ° C.
• It freezes at a temperature of – 23 ° C.
• If the MOTOREX COOL-X AW is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.
• Make sure that the liquid is completely thawed.
• Shake the container well after thawing.
• The max. storage time in the closed original container is 1 year.

Maintenance

• COOL-X AW must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).
• If a third-party product is to be replaced by COOL-X AW, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.
• Please note the maintenance instructions of the spindle manufacturer.

Note: You can find the Motorex CS Cleaner here !

Technical specifications

• ​Color (DIN ISO 2049): green
• Density at 20 °C  (ASTM D 4052): 1.036 g/ml
• PH value range (DIN 51785): 8.0 – 8.7
• Solidification point (ASTM D 5950): -23 °C
• Application range: 4 – 80 °C
• Reading value of refractometer:  *1.4 % Brix-1
• Water hazard class: WGK1
• Disposal code: VeVA / EWC 120109

---

Hazard Statements (CLP)

Signal word: Danger.

Hazard Statements (H-phrases)

• H319: Causes serious eye irritation.
• H360D: May damage the unborn child.

Precautionary Statements (P-phrases)

Prevention:

• P201: Obtain special instructions before use.
• P202: Do not handle until all safety precautions have been read and understood.
• P264: Wash thoroughly after handling.
• P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.

Response:

• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P337+P313: If eye irritation persists: Get medical advice/attention.

Storage:

• P405: Store locked up.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional Information

• For professional users only.

Information on product safety (Manufacturer, Contact)

MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com