Molykote HSC PLUS Paste Mineral oil-based anti-seize MoS2 400ml spray

Molykote HSC PLUS Solid lubricant paste lead and nickel free

• Temperature Range: From -30 to +1100°C
• Can be used over a wide range of temperature
• Enables non-destructive dismantling, even after long use at high temperatures
• High load-carrying capacity
• Due to stated coefficient of friction, defined pre-tensioning forces for bolted joints can be achieved
• Good corrosion protection;
• Good electrical conductivity
• Content: 250g can
• Also available as: 100g tube; 400ml Spraycan; 1kg can; 5kg bucket

Applications

• Used for metal/metal combinations that are subjected to high temperatures and frictional contacts, typically for bolted joints
• Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects and also require a low and constant coefficient of friction
• Applied as a contact lubricant for electrically conducting components
• Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants

Technical specifications

• Temperature: From -30 to +1100°C
• Solid Lubricant: Copper, MoS2, white solids
• Color: Copper
• For detailed informations view our datasheet here

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements (H-statements)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H410: Very toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-statements)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.

Response:

• P391: Collect spillage.

Storage:

• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Additional Information

• 61.35% of the mixture consists of ingredient(s) of unknown acute toxicity by oral administration.
• 61.35% of the mixture consists of ingredient(s) of unknown acute dermal toxicity.
• 9.2025% of the mixture consists of ingredient(s) with unknown hazards to aquatic environments.

DuPont de Nemours (Deutschland) GmbH, Hugenottenallee 175, 63263 NEU-ISENBURG, GERMANY, +49 (0) 6102 18 – 0, [email protected], www.dupont.de