Loctite MR 5922 Flexible flange sealant black 200ml tube

LOCTITE® MR 5922 (formerly known as LOCTITE 5922) is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol, and fillers.
 

• Pack size: 200 ml tube (Loctite no. 235386)
• Available as well in 60 ml tube

Application

• Specifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assemblies
• Seals flanges, fittings, connections and flexible assemblies against leakage
• Can be used for the repair of damaged pre-cut gaskets (increases the reliability of gasket seals)

Characteristics

• Extends gasket life
• Prevents leaks
• Slow drying
• Flexible setting
• Increases the reliability of gasket seals

Technical specifications

Technology	Solvent based
Chemical Type	Resin / Isopropanol / Fillers
Appearance	Black viscous paste
Components	One part – requires no mixing
Viscosity	Very high
Cure	Solvent evaporation

LOCTITE MR-5922, LOCTITE MR5922

---

Label elements (CLP)

 

Signal word: Danger.

Hazard statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst when heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Supplemental information (EUH phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements (P-phrases)

Prevention:

• P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• P261: Avoid breathing aerosol.

Response:

• P337+P313: If eye irritation persists: Get medical advice/attention.

Additional:

• P251: Do not pierce or burn, even after use.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
• P211: Do not spray on an open flame or other ignition source.
• P102: Keep out of reach of children.

Other hazards

• Aerosol container is under pressure. Do not expose to high temperatures.

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com