Description
Klüberbio LM 2-32 Eco-friendly hydraulic fluids | N° 009084
- Klüberbio LM 2 oils are fully biodegradable, eco-friendly hydraulic fluids based on synthetic ester oils.
- The product series complies also with the U.S. Environmental Protection Agency’s requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation standards according to Appendix A of the EPA’s Vessel General Permit (VGP).
- In addition, Klüberbio LM 2 oils meet or even exceed the minimum requirements of HEES oils according to DIN ISO 15380.
- Temperature range: -45°C to +110°C
- Volume: 200 l barrel
Benefits for your application
- Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit).
- Fully biodegradable, non-toxic products reducing environmental impact in the event of leakage
- Facilitate start-up of hydraulic systems at very low temperatures due to very good viscosity-temperature behaviour and low pour point; can therefore be used in hydraulic systems with high temperature fluctuations.
Applications
- Klüberbio LM 2 oils are intended for applications in mobile hydraulic systems, e.g. in the marine and offshore industries as well as for use in the building and water engineering sectors. They are also preferred in stationary hydraulic equipment operating in ecologically sensitive environments, e.g. in hydroelectric power plants and waterway locks
Application notes
- Klüberbio LM 2 oils meet ISO 15380 requirements in terms of compatibility with standard reference elastomers. Nevertheless, due to the large variety of materials available, compatibility with seals and paint coatings should be verified. In general, Klüberbio LM 2 oils are miscible with mineral oil based hydraulic oils. However, a miscibility test should be performed in order to rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend flushing the hydraulic system with the Klüberbio LM 2 oil.
Technical specifications
| Manufacturer number | 0090842363 |
| Colour space | green |
| Service temperature, lower limit | -45 °C |
| Service temperature, upper limit | 110 °C |
| Density, DIN 51757, 20°C | approx. 0.915 g/cm³ |
| Flash point, DIN EN ISO 2592, Cleveland open cup | ≥ 220 °C |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C |
approx. 6.3 mm²/s |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C |
approx. 32 mm²/s |
| Viscosity index, DIN ISO 2909 | ≥ 135 |
Klüberbio LM2-32, Klüberbio LM 2 32
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Patrizia G. –
Surprisingly good quality for the price.
Tristan V. –
Good build quality and reliable. Very easy to set up. Easy to use and very practical.
andreas_s –
Very fast shipping.
ginevra_b –
Been using it for 2 weeks and already see results! Very satisfied, better than I expected. Better than anything I’ve tried so far.
Roberto –
Fast and secure delivery. Top product, would definitely recommend. Everything OK. Practical and functional.