Klüber POLYLUB GLY 791 Special synthetic lubricating grease 25kg

Special synthetic lubricating grease for plain bearings subject to high loads and temperatures

• POLYLUB GLY 791 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It has been designed for friction reduction and wear protection of plain bearings and slideways with metal/metal or plastic/metal material pairings.
• This special lubricant covers a wide range of operating conditions, from low to high speeds and loads, even in the case of fibre-reinforced plastic components and metal/plastic sliding pairings.
• The lubrication of plastics is special in a number of ways . As the behaviour of metals and plastics differs in many aspects, the lubricant’s properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB 791, Klüber Lubrication offers a product which is free of solid lubricant, but covers the many operating conditions mentioned above.
• Owing to the many different plastic compositions, however, we recommend checking their compatibility particularly prior to series application.
• Content: 25kg bucket
• Available in 400g cartridge, 1kg can, 25kg bucket

Benefits for your application

• For metal/metal and plastic/steel material pairings
• Neutral towards many plastics and elastomers
• Provides good wear protection to fibre-reinforced plastics
• Good corrosion protection of metal mating surfaces

Application

• Vehicles: Seat mechanisms, shock absorbers
• Slideways, plain bearings: For many types of plain bearing designs. POLYLUB GLY 791 prevents stick-slip to a large extent, particularly in applications where normally a hydrodynamic film cannot form.
• Owing to the good damping properties, noise and cracking is considerably reduced.

Application notes

• POLYLUB GLY 791 is applied by brush, spatula or automatic metering systems. The use of central lubrication systems is possible in principle but should be checked in each individual case.

Product data

Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)

• H317: May cause an allergic skin reaction.

Precautionary Statements (P-phrases)

Prevention:

• P272: Contaminated work clothing should not be allowed out of the workplace.
• P280: Wear protective gloves.

Response:

• P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
• P362 + P364: Take off contaminated clothing and wash it before reuse.

Hazardous Components:

• Naphthenic acids, bismuth salts

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com