Description
CENTOPLEX 2 Multi-purpose greases for rolling and plain bearings | N° 020062
- CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap.
- They meet the rolling bearing grease requirements according to DIN 51825 K.
- Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.
- The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.
- Temperature range: -30°C to +130°C
- Volume: 370g cartridge
- Also available in: 1 kg can, 25kg bucket, 180kg drum
Benefits for your application
- Long-term lubrication of simple applications
- Multi-purpose greases
Application
- CENTOPLEX 2 and CENTOPLEX 3 are used for rolling and plain bearings. When used for long-term lubrication, temperatures at the friction point should be < 70 °C.
- The greases can be used up to their maximum service temperature of 130 °C provided fresh grease is constantly fed to the friction point. We would be pleased to provide more detailed information on relubrication intervals and quantities.
- CENTOPLEX 2 and 3 are also suitable for the lubrication of toothed and worm gears, guides and threaded spindles.
Application notes
- CENTOPLEX 2 and 3 can be applied by grease gun, brush or spatula. If a fully-automatic lubrication system is available for relubrication, CENTOPLEX 2 should be used.
- For initial lubrication CENTOPLEX 2 or CENTOPLEX 3 can be used depending on the bearing seal.
Technical specifications
| Chemical composition, type of oil | mineral oil |
| Chemical composition, thickener | lithium soap |
| Lower service temperature | -30 °C / -22 °F |
| Upper service temperature | 130 °C / 266 °F |
| Colour space | brown |
| Appearance | almost transparent |
| Texture | homogeneous |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 100 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 10 mm²/s |
| Drop point, DIN ISO 2176, IP 396 | >= 190 °C |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Amélie –
I noticed the difference right away! I’ve been using it for 2 weeks and I already see results!
Emma K. –
Surprisingly good quality for the price. Packaging was slightly damaged, but the product is excellent. I noticed a difference after a short time! Very satisfied, better than expected.
max_de –
Perfect for what I needed.
ethan_sky –
Very easy to set up. Works just as advertised. Everything OK, recommended. Product as expected.
Penelope –
No unpleasant smell, which I really appreciate.
aaron_99 –
Satisfied with the quality.