Description
Klüberpaste HEL 46-450 High-temperature screw paste | N° 089032
- Klüberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
- Klüberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant.
- Temperature range: -40°C to +1000°C
- Volume: Can 750 g
- Also available in: Tube 70 g, Cartridge 600 g, Bucket 30 kg
Benefits for your application
- Reliable screw connection ensured by constant and sufficient preload force
- Easy release also after long time at high temperature
- Approved in Ford tox. No. 138624
Application
- Screw paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C.
- Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems).
- For connecting elements in turbochargers and compressors.
Application notes
- It is important to clean and degrease the contact surfaces thoroughly before applying Klüberpaste HEL 46-450.
- A thin layer of paste is then applied by brush, leather cloth or plastic sponge.
- Klüberpaste HEL 46-450 spreads easily over the entire surface and thus prevents excess lubrication.
Technical Specifications
| Lower service temperature | -40 °C / -40 °F |
| Upper service temperature | 1000 °C |
| Colour space | black |
| Density at 20 °C | approx. 1.43 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 325 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 340 x 0.1 mm |
| Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C | <= 600 mbar |
| Drop point, DIN ISO 2176, IP 396 | >= 250 °C |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 5 000 N |
Hazard Information (CLP)
Signal word: Warning
Hazard Statements (H-Codes)
- H317: May cause an allergic skin reaction.
- H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-Codes)
Prevention:
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P273: Avoid release to the environment.
- P280: Wear protective gloves.
Response:
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
- P391: Collect spillage.
Hazard-determining component(s)
- 4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol
Other Hazards
- This substance/mixture contains no components at concentrations of 0.1 % or more classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Hannah G. –
I was skeptical, but now I’ll order regularly. Better than anything I’ve tried so far.
Chloe K. –
A friend recommended it; I’m very happy with the purchase. Very effective; I noticed a change in just one week. Pleasant to use at home.
emilia88 –
This solved my problem completely!
louis75 –
Excellent service. Better quality than I expected. Packaging was excellent. Product as described.
Marie U. –
Pleasant to use at home. Very effective; noticed a change after just one week.
nathan75 –
No complaints. Arrived on time.
Tobias –
Excellent service. Impeccable service. Top seller. Product arrived well packaged.
Franziska –
Packaging was slightly damaged, but product is excellent. The quality pleasantly surprised me. Better than anything I’ve tried so far. Packaging was slightly damaged, but the product is excellent.