Klüber BARRIERTA L 55/3 High-temperature long-term grease NLGI 3, 1Kg

BARRIERTA L 55/3 High-temperature long-term grease NLGI 3 | N° 090014

• BARRIERTA L 55/0-3 series long-term greases offer excellent resistance to high temperature and aggressive media and at the same time compatibility with plastics and elastomers.
• The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. BARRIERTA L 55/0-3 are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The use of BARRIERTA L 55/0-3 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
• Service temperature: -40 °C to +260 °C
• Size: 1Kg can
• Available in 800g cartridge, 10kg bucket, 30kg bucket

Advantages for your application

• Higher machine availability and less need for maintenance
  • at very high operating temperatures up to 260 °C
  • under the influence of aggressive media and vapours
  • when used with plastics and sealing materials
• Reliable operation in numerous industries and component types
  • thanks to BARRIERTA base oils, which are made specifically to enable long-term stability
  • backed by a large number of approvals and references for various applications
  • four consistency classes to suit different applications

Application

• Rolling and plain bearings subject to high temperatures
• One of the well-known strengths of the BARRIERTA L 55 series is the products’ suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals.
• In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in
  • valves, fittings and installations e.g. in the chemical industry
  • pneumatic components
  • level gauges, e.g. for fuels or chemicals
  • seals (static, dynamic)
  • extraction systems

Application notes

• For optimum results we recommend cleaning all friction points with white spirit 180/210 and then with Klüberalfa XZ 3-1 or Klüberalfa NH1 XZ 3-1 prior to initial lubrication. Subsequently, the friction points should be dried with clean dry compressed air or hot air to remove all solvent residues.
• The friction point must be free from oil, grease, perspiration and contamination particles before initial lubrication.

Technical specifications

BARRIERTA L55/3, BARRIERTA L 55 3, BARRIERTA L 55-3

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com