Description
Klüber Klüberbio AG 39-602 Environmentally acceptable adhesive lubricant for open gears and steel cables
- Klüberbio AG 39-602 contributes to long component life and good corrosion and wear protection.
- The finished product meets the biodegradability, minimally toxic and non-bioaccumulative standards established by the US EPA for the 2013 Vessel General Permit.
- Klüberbio AG 39-602 contains > 60 % of renewable raw materials.
- Temperature range: -20°C to +100°C
- Volume: 25kg bucket
- Also available in: Cartridge 400g, Can 1kg, Drum 200kg
Benefits for your application
- Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit
- Reduced environmental impact in the event of discharge into water. The base oil is derived from renewable resources
- Good adhesion and water resistance for long relubrication intervals
- Selected additives ensure longer component life and reduced wear
- Corrosion protection under seawater influence due to especially selected anti-corrosion additives
Applications
- Klüber Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water.
- The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.
Application notes
- Klüber Klüberbio AG 39-602 can be applied continuously through transfer lubrication with pinion or by brush.
- Compressed-air lubrication equipment can be used for the lubrication of steel cables.
Technical specifications
| Article number | 009042 |
| Chemical composition, type of oil | ester oil |
| Chemical composition, thickener | calcium soap |
| Lower service temperature | -20 °C / -4 °F |
| Upper service temperature | 100 °C / 212 °F |
| Colour space | yellow |
| Texture | homogeneous |
| Texture | fibrous |
| Density at 20 °C | approx. 0.97 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 290 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 330 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 600 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 85 mm²/s |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C | <= 1 400 mbar |
| Drop point, DIN ISO 2176, IP 396 | >= 120 °C |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Edoardo L. –
Great item. Better quality than I expected. Great purchase.
Aria –
I noticed the difference right away! I’ve been using it for 2 weeks and I already see results!
federico_it –
Everything perfect, thank you. Exactly what I was looking for. Simple to install. Exactly as in the pictures.
william_s –
Punctual service. Everything in order.
zoe_paris –
Surprisingly good quality for the price.
Pauline –
This solved my problem completely! Surprisingly good quality for the price.
Klara I. –
It completely solved my problem! Very effective; noticed a change after just one week.
Aurélie B. –
Very satisfied, better than I expected. A friend recommended it and I’m so glad I ordered. Not too big, not too small, perfect. I was skeptical, but now I’ll order it regularly.
federico_it –
Perfect, nothing to say.
Jules –
Would buy again. Very fast shipping. Works just as advertised.
charlotte_fr –
Very satisfied, better than expected. Not too big, not too small, perfect. Looks even nicer in real life.