Description
Universal high-performance lubricant.
- MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance.
- Content: 1kg can
- Available in 400g cartridge , 1kg can, 25kg bucket, 180kg drum
Benefits for your application:
- Universal high-performance lubricant
- High pressure absorption capacity
- Good wear protection
- Good anticorrosion behaviour
- Pumpable through centralized systems
Application:
MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.
Application notes:
MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication.
Product data:
| Article number | 020232 |
| Texture | homogeneous |
| Color space | red |
| Appearance | transparent |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 355 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 385 x 0.1 mm |
| Base oil viscosity at 40 °C, calculated value | approx. 590 mm²/s |
| Base oil viscosity at 100 °C, calculated value | approx. 31.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer | approx. 3 000 mPas |
| Drop point, DIN ISO 2176, IP 396 | > 180 °C |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C | < 1 400 mbar |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | >= 12 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Hazard Statements (CLP)
Signal word: Warning.
Hazard Statements (H-Statements)
- H319: Causes serious eye irritation.
Precautionary Statements (P-Statements)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection/face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
Additional Labelling (EUH-Statements)
- EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
harper23 –
Easy to use, without making a mess.
lea_sonne –
Perfect for my needs; I couldn’t be happier.
Evan M. –
Everything as expected. Fast and secure delivery. Arrived on time. Excellent workmanship.
Martina V. –
Better than anything I’ve tried so far. No unpleasant smell, which I really appreciate. It completely solved my problem! I was skeptical, but now I order regularly.
julie_75 –
A friend recommended it; I’m very happy with the purchase. I’ve been using it for 2 weeks and already see results! Not too big, not too small, just right.
Cecilia –
Pleasant to use at home. Super fast delivery, thank you. I’ve been using it for 2 weeks and I already see results!
aaron_99 –
Exactly what I needed.
benjamin23 –
Perfectly as described. Worth every cent. Solid product, would buy again. Really good value for money.
lucie88 –
I noticed a difference after a short time! Very fast delivery, thank you. Better than anything I’ve tried before.
anton_ber –
Everything works perfectly so far. Well packaged and delivered quickly. Punctual service. Delivers what it promises.
nathan99 –
Everything as expected.