Description
High-temperature and long-term lubricant for rolling bearings subject to high loads
- PETAMO GHY 443 and PETAMO GHY 441 (recommended for relubrication due to its softer consistency) are special lubricating greases based on ester oil and polyurea thickener.
- The greases have been especially designed for the lubrication of rolling and plain bearings subject to high loads and temperatures. Being an efficient alternative to mineral oil based products, PETAMO GHY 443 and PETAMO GHY 441 achieve a much longer service life and therefore help to reduce maintenance costs. Due to their high base oil viscosity and excellent thermal stability they are mainly used for large rolling bearings.
- Size: 400g cartridge
- Available in 400g cartridge, 1kg can, 25kg bucket
Benefits for your application
- Tried-and-tested grease for long-term lubrication, less maintenance and high reliability
- Good load-carrying capacity prevents wear, hence longer bearing life
- Excellent water resistance and corrosion protection prevent premature bearing failure and help to reduce maintenance costs
- Reduction in grease consumption and high resistance to oxidation and ageing due to the synthetic grease formulation
Application
- For the initial and relubrication of rolling and plain bearings subject to high temperatures in general machinery, electric motors, load rollers in conveyors, roller bearings and continuous wood panel presses, load rollers in continuous casting machines and many other applications.
Application notes
- The greases can be applied by spatula, brush, grease gun or via centralized lubrication systems (PETAMO GHY 441). Prior to initial application please check compatibility with current greases and pre-clean bearings, where necessary.
Product data
| Lower service temperature | -30 °C / -22 °F |
| Upper service temperature | 180 °C / 356 °F |
| Color space | beige |
| Texture | fibrous |
| Texture | homogeneous |
| Density at 20 °C | approx. 0.97 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 310 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 340 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 440 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 36 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water |
<= 1 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water |
<= 1 corrosion degree |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -30 °C | <= 1 400 mbar |
| Drop point, DIN ISO 2176 | >= 250 °C |
| Speed factor (n x dm) | approx. 250 000 mm/min |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
24 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
beatrice88 –
Looks even nicer in real life. Feels nice to use at home. Better than anything I’ve tried before.
alberto_it –
Very stable. Delivers what it promises. Everything perfect, thank you. Excellent-quality product.
benoit75 –
Excellent product. Price matches the quality. Everything in perfect condition. Highly recommended.
Leonardo –
Excellent material.
diego_s –
Impeccable quality. Product as described.
Arthur –
Very easy to set up. Everything perfect, would buy again. Excellent service. Works perfectly.