Klüberplus S 06-100 Assembly gel for elastomer components 1kg tin

Klüberplus S 06-100 Gel for facilitated assembly of elastomer and plastic components | N° 012102

• When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force. 
• Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. 
• Volume: Can 1 kg
• Also available in: Canister 20 kg, Bucket 25 kg, Drum, 180 kg

Benefits for your application

• Cost savings due to shorter assembly times and reduction of rejects due to lower assembly forces
• Environmentally sound and safe to use
  • Lower consumption of chemicals due to excellent temporary lubricating effect
  • Non-flammable, water-based design – without solvent, mineral oil or silicones
  • Prevents workplace injuries due to less force required for assembly
• Neutral towards many materials, including EPDM, NBR, FKM, VMQ, ACM

Applications

• The product concept has proven particularly successful in profiled seals, shaft seals, rubber sleeves and O-rings in the automotive industry.
• Joining and assembly processes with rubber-elastic materials
• Application examples:
  • O-rings
  • Membranes, bushings
  • Radial shaft seals (RSS) on shafts and in casings
  • Cover caps (e.g. for gear shafts)
  • Profiled seals, e.g. for doors, windows, crankshaft casings
  • Stopper and fixing elements
  • Sealing elements, moulded rubber parts
  • Hoses (e.g. brake fluid, cooling fluid and fuel hoses)

Application notes

• The Klüberplus S 06 series shows good stability and no tendency to separation even after prolonged storage. Stirring is therefore not required prior to use.
• The products’ viscosity can be reduced by dilution with water. Once diluted, the product should be used up completely without delay.
• The Klüberplus S 06-100 series prevents during its application and upon complete evaporation of any water the immediate formation of rust / contact corrosion for a limited period of time.

Technical specifications

Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)

• H317: May cause an allergic skin reaction.

Precautionary Statements (P-phrases)

Prevention:

• P261: Avoid breathing vapours.
• P272: Contaminated work clothing should not be allowed out of the workplace.
• P280: Wear protective gloves.

Response:

• P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
• P333 + P313: If skin irritation or rash occurs: Get medical advice/ attention.
• P362 + P364: Take off contaminated clothing and wash it before reuse.

Hazardous Components:

• 2-methylisothiazol-3(2H)-one

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com