Shell Gadus S2 V100 2 EP General Purpose Lithium Grease 400g cartridge

Shell Gadus S2 V100 2 (previously called Shell Alvania Grease RL2) is a general purpose grease based on a new lithium hydroxystearate soap thickener fortified with anti-oxidant, anti-wear and anti-rust additives. It is a medium consistency grease ideal for centralised lubrication systems operating at normal temperatures.

Features

• Reliable high temperature performance – Very good performance up to +130°C, resulting in longer bearing life.
• Good oxidation and mechanical stability – Resists the formation of deposits caused by oxidation at high operating temperatures. Shell Gadus S2 V100 greases are extremely stable under vibrations and give NO LEAKAGE even in repeated shock-loaded bearings.
• Good corrosion resistance characteristics – Effective protection in hostile environments.
• Long storage life – Does not alter in consistency during prolonged storage.

Main Applications

• Rolling element and plain grease lubricated bearings
• Electric motor bearings
• Sealed-for-life bearings
• Water pump bearings
• May be used under a wide range of operating conditions offering very significant advantages over conventional lithium greases at high temperature or in the presence of water.
• A medium consistency grease designed, mainly, for general industrial lubrication.
• Ideal for centralized lubrication systems operating at normal temperatures.

Specifications, Approvals & Recommendations
For a full listing of equipment approvals and recommendations,please consult your local Shell Technical Helpdesk, or the OEMApprovals website

Technical data

Property	Method	Shell Gadus S2 V100 2
NLGI Consistency	–	2
Thickener	–	Lithium-Hydroxystearate
Base Oil Type	–	Mineral Oil
Kinematic Viscosity	IP 71 / ASTM D445 / DIN 51562-1	100
Kinematic Viscosity	IP 71 / ASTM D445 / DIN 51562-1	11
Work Penetration	IP 50 / ASTM D217 / DIN ISO 2137	265-295
Drop Point	IP 396	180

Health, Safety & Environment

• Shell Gadus S2 V100 Grease is unlikely to present any significant health or safety hazard when properly used in there commended application and good standards of personal hygiene are maintained.
• Avoid contact with skin.
• Use impervious gloves with used oil.
• After skin contact, wash immediately with soap and water.
• Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained fromhttp://www.epc.shell.com/Protect the EnvironmentTake used oil to an authorised collection point. 
• Do not discharge into drains, soil or water.

Additional Information
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
 

Information on product safety (Manufacturer, Contact)

Shell Deutschland Oil GmbH, Suhrenkamp 71-77, 22335 Hamburg, GERMANY, +49 40 6324-6255, [email protected], www.shell.com