Petromark 10235 Visco Lube High pressure adhensive lubricant 600ml

Visco Lube adhensive lubricant for Cogs and wheels, open gearboxes, chains, hinges etc.

PETROMARK® 10235 VISCO LUBE is a high pressure resistant transparent adhesive lubricant which lubricates parts exposed to strong pressure, impacts or vibration.
 

• Extremely high holding power for both metal and other materials.
• Is derived from a high quality synthetic grease that preserves the treated parts in a damp environment
• The material is fluid and penetrates into inaccessible places
• Long lasting effectiveness in places which cannot be lubricated in short term intervals
• PETROMARK® 10235 VISCO LUBE has a temperature range from -35°C up to + 225°C and is resistant to corrosion
• Content: 600ml spray can

Use: Cogs and wheels, open gearboxes, chains, hinges, steel cables, winches, sealing faces, door springs, gear racks, treated spindles, hinge points etc.

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H222-H229: Extremely flammable aerosol. Pressurised container: May burst if heated.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safety Statements (P-phrases)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P251: Do not pierce or burn, even after use.
• P260: Do not breathe aerosol.
• P211: Do not spray on an open flame or other ignition source.
• P280: Wear protective gloves / eye protection.
• P273: Avoid release to the environment.
• P271: Use only outdoors or in a well-ventilated area.

Response:

• P301+P310: IF SWALLOWED: Immediately call a doctor.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P331: Do NOT induce vomiting.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P403: Store in a well-ventilated place.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional Information

• EUH066: Repeated exposure may cause skin dryness or cracking.

Other Hazards

• PBT: Not applicable.
• vPvB: Not applicable.

Petromark Automotive Chemicals B.V., Rooswijkweg 316, 1951 ME Velsen-Noord, NETHERLANDS, +31 251 211397, [email protected], www.petromark.eu