Marston MMD.K300 Universal jointing compound 330g cartridge

• Appearance: red
• Density: 1,10 g/cm3
• Solid content: 60.0 – 70.0 % Polyurethan
• Solvent content: 30.0 – 40.0% (Mix Aceton/ Ethylacetat)
• Temperaturerange from: -55°C
• Temperaturerange to: +270°C (short-term bis 300°C)
• Max. Gap filling: ca. 0,20 mm
• Consistance: pasty
• Effect on Metals: Prevents atmospheric corrosion
• Shelf life: Unlimited at constant Temperature

Isocyanate free!

Resistance:

• Permanent plastic, very adhesive sealing compound on the basis of polyurethan.
• Due to excellent thermal, mechanical and chemical resistance.
• MARSTON SEALANT is specially suitable for highly stressed sealing joints.

MARSTON SEALANT is resistant, among others, against all mineral oils and multitude of synthetic oils, against lubricants, fuels, additives, air, gases, water as well as waterantifreeze-blends.

Material combinations:

• 1. metal-Metal
• 2. metal-plastics
• 3. plastics-plastics

Properties:

• Permanent plasticity
• Excellent adhesion to bonding surfaces
• Resistant to many media
• Instantly ready to use
• Easy dismounting
• Corrosion-free

Label elements
Regulation (EC) No. 1272/2008
Hazard components for labeling
Ethyl acetate; ethyl acetate
Acetone; propan-2-one; propanone
Signal word: Danger
Pictograms:

H225 Highly flammable liquid and vapor.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Hazard statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P271 Use only outdoors or in a well-ventilated area.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses if possible. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P312 Call a POISON CENTER/doctor if you feel unwell.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate recycling or disposal facility.
Special labelling of certain mixtures
EUH066 Repeated exposure may cause skin dryness or cracking

Marston-Domsel GmbH, Bergheimer Strasse 15, 53909 Zülpich, GERMANY, +49 2252 9415-0, [email protected], www.marstondomsel.de