Weicon Easy-Mix HT 180 2-component epoxy adhesive black 50ml cartridge

WEICON Easy-Mix HT 180 Epoxy Adhesive

WEICON Easy-Mix HT 180 is a 2-component adhesive on epoxy resin basis and has a high temperature resistance of up to +180°C; short term to +230°C.
The adhesive is highly viscous and stable which makes it also suitable for vertical applications. It is shock and impact resistant, has a long pot life, cures at room temperature, can be processed mechanically and his special fillers allow a constant bonding line. The adhesive is particularly suitable for the bonding of composite materials and metal and can be spot-welded while curing. 
 

• High-temperature resistant
• Steady
• Shock and impact resistant

Processing

WEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded.
The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all.

Technical specifications

• Base: Epoxy resin mineral-filled
• Texture: paste consistency, crack-filler
• Colour: black
• Mixing ratio by weight (Resin / Hardener): 2:1
• Density of the mixture: 1,1 g/cm³
• Viscosity of the mixture at 20°C (+68°F): pasty
• Adhesive gap bridging up to max:. 4 mm
• Processing temperature: +10 to +40 °C
• Curing temperature: +10 to +50 °C
• Pot life at 20°C (+68°F) for 10ml material: 60 min.
• Handling strength (35% strength) after: 120 min.
• Capable of bearing mechanical loads (50% strength) after: 4 h

Hazard Warnings (CLP)

Signal word: Warning

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H411: Toxic to aquatic life with long-lasting effects.

Safety Statements (P-phrases)

Prevention:

• P280: Wear protective gloves. Wear eye or face protection.
• P273: Avoid release to the environment.
• P261: Avoid breathing vapors.
• P264: Wash thoroughly after use.

Response:

• P391: Collect spillage.
• P362 + P364: Take off contaminated clothing and wash before reuse.
• P302 + P352: IF ON SKIN: Wash with plenty of water.
• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313: If eye irritation persists: Get medical advice/attention.

Disposal:

• P501: Dispose of contents/container in accordance with local regulations.

Other Hazards

• No known hazards leading to classification.
• The product contains no PBT or vPvB substances as per Annex XIII of Regulation (EC) No 1907/2006.

WEICON GmbH & Co. KG, Königsberger Strasse 255, 48157 Münster, GERMANY, +49 251 9322-0, [email protected], www.weicon.de