Wacker Elastosil A33 Moisture Curing Silicone Rubber RTV-1 ivory 310ml

Wacker ELASTOSIL® A33 IVORY is a non-slump RTV-1 silicone rubber, which cures at room temperature. During vulcanization it splits off an organic amine.

Application

• Multipurpose grade for sealing and bonding, suitable for high temperatures and oil contact

Characteristics

• Non-slump
• Oil resistant
• Amine-curing system
• No use of organotin catalysts
• Good heat stability
• Excellent primerless adhesion to many substrates
• Recommended service temperature from -45 °C to +200 °C
• Max. recommended short term peak temperature exposure 220°C

Technical specifications
 

Property	Inspection Method	Value
Color		ivory
Elongation at break	DIN 53504 S1 / ISO 37	300 %
Hardness Shore A	DIN ISO 48-4	28
Tensile strength	DIN 53504 S1 / ISO 37	2.5 N/mm²
Viscosity, dynamic at 25 °C | 0.5 1/s	DIN EN ISO 3219	1000000 mPa.s
Density at 23 °C in water	DIN EN ISO 1183-1 A	1.14 g/cm³
Skin forming time		10 – 30 min
Size		310 ml
Packaging unit		cartridge

Fields of application

• Appliances Industry
• Bonding & Sealing
• Formed-In-Place-Gaskets (Wet Type)
• Industrial Assembly
• Ready-to-Use Silicone Sealants – General Applications
• Small Appliances

---

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.

Safety Statements (P-phrases)

Prevention:

• P280: Wear protective gloves/protective clothing/eye protection.

Response:

• P302+P352: IF ON SKIN: Wash with plenty of water and soap.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.

Hazardous Ingredients

• N,N’,N”-Tricyclohexyl-1-methylsilantriamine

Other Hazards

• Inhalation of aerosol mists may cause health damage.
• The substance/mixture does not contain components with endocrine-disrupting properties as per REACH or EU regulations.

Information on product safety (Manufacturer, Contact)

Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, [email protected], www.wacker.com